Duct Manufacturing Coil Lines

Pro-Fabriduct

4 x 1525mm x 5 tonne Decoilers featuring individual hydraulic drives with hydraulic hold down arms.

Machine Specification

  • Bottom pay off via auto grid feed to auto select station and infeed table to processor.
  • Pro Ductomatic processor unit to 1525 x 1.6mm material and features SMACNA beader.
  • Notching heads for drive cleat, TDC/TDF, Pittsburgh and Snaplock.
  • Hydraulic shear cut off and forming head for male Pittsburgh and Snaplock.
  • 3 metre transfer table to female Pittsburgh station.
  • Mark-XV rollforming station for Pittsburgh and Snaplock female seams.
  • 3 metre transfer conveyor and positioning to TDC/TDF forming station.
  • 14 station TDC/TDF Duplex rollformer for 35mm flange.
  • Feed table to wrap brake.
  • Wrap brake and 3 metre run out table.
  • CNC fully programmable touch screed from centrally located control console.
  • Line offered and U shape configuration and occupy floor space approximately 6.8m x 16m. You to advise whether line to run right hand U or left hand U direction.
  • Power requirements: 125amp, 415v, 50Hz
  • Air requirements: 15cfm at 90psi.

Also available:
Formtek Mansaver for Overhead Cranes for Jibbed Forklifts

1500 x 5 tonne decoiler loading and unloading for Coil Lines fully certified

Machine Specification

  • Coil Gauge 16 gauge to 1.5 – 0.4mm, Optional – 1.89mm.
  • Coil Width 1550mm max, 152mm min – Optional – 1854mm coil width.
  • Part Length 3048mm max.
  • Part Length Tolerances +/- 0.5mm
  • Processing Speed Up to 22.5m/min
  • Straightener Section Removes Coil Set.
  • PC based Controls preset and monitor machine functions.
  • Compressed Air None required.
  • Beading Section standard pattern 305mm centres.
  • Notching and Hole Punching V and corner notch combination dies for slip & drive, TDC, TDF, Snaplock and Pittsburgh

Options

  • Centre and end hole punching for 8mm and 11mm dia. cross-tie installations.
  • Cleat Roller, Roll Forms 180 degree hems for drive cleats and Snaplock Button Punch.
  • Tie Rod Hole Punching, Male Button Lock and slitting.
  • Pro-Ductomatic comes in two standard models known as short frame or long frame. Frame type is determined by options the customer chooses.

Also available:
Formtek Mansaver for Overhead Cranes for Jibbed Forklifts

1500 x 5 tonne decoiler loading and unloading for Coil Lines fully certified

We are located in Salisbury
we’re open 8:30AM to 5:00PM, visit us now!